R49 Enviromose Oxygen Cleaner Datasheet
R49 Enviromose Oxygen Cleaner
Oxygen Cleaner Enviromose oxygenated cleaner is highly effective in removing dirt, grime, mould, tough stains, oil stains and algae from wood, stone, concrete and plastic surfaces.
Enviromose oxygenated cleaner is highly effective in removing dirt, grime, mould,
tough stains, oil stains and algae from wood, stone, concrete and plastic
surfaces.
Our product is formulated using oxygenated ingredients rather than bleach, caustic or acids. It is a biodegradable formulation which is kinder to the environment, safer to use and does not damage the surfaces being cleaned.
Our product is formulated using oxygenated ingredients rather than bleach, caustic or acids. It is a biodegradable formulation which is kinder to the environment, safer to use and does not damage the surfaces being cleaned.
- On large areas the process needs to be carried out in sections to ensure the solution does not dry on the surface being cleaned.
- Mix the following ratios of product into a plastic bucket filled with 5 litres of warm water.
- Gently stir until all the product has dissolved:
- Heavy soiling: use 2 heaped caps full of product
- Light cleaning: use half a cap full of product
- Apply the solution generously with a mop, garden sprayer or watering can and leave for 15 minutes.
- Do not allow the solution to dry on the surface being cleaned or you will need to start the process again.
- If the area being cleaned is heavily soiled, it should be agitated with a stiff brush.
- Repeat application process if required and finally rinse the cleaned surface thoroughly with clean water.
