R40 Concrete Block & Paving Sealer NATURAL FINISH Datasheet
R40 Concrete Block & Paving Sealer NATURAL FINISH
Enviromose Block & Paving Sealer is an advanced formula, high performance sealer using the latest flouropolymer technology to provide a waterproof, breathable transparent, durable seal to Block Paving, Paths & Patios.
Enviromose Block & Paving Sealer is an advanced formula, high performance sealer
using the latest flouropolymer technology to provide a waterproof, breathable
transparent, durable seal to Block Paving, Paths & Patios. Suitable for limestone and
granite. Solvent free and easy to use, Enviromose Block & Paving Sealer helps to
repel dirt, oil, stains, grease and inhibits the growth of moss and algae.
- Shake container before use
- Ensure surface is thoroughly dry before application
- Do not pour enviromose block & paving sealer directly onto paving. Apply by brush, roller or garden sprayer with fan pattern spray attachment, applying an even coat and avoiding runs or puddles by removing excess product from the surface
- Apply 2 coats, the second within 2 hours after the first. Further coats can be applied if required
- Does not bind sand
- Keep out of reach of children.
- Wear protective gloves/protective clothing/eye protection/face protection.
- Do not get in eyes, on skin, or on clothing.
- Do not eat, drink or smoke when using this product.
- If swallowed: immediately call a poison centre/doctor.
- If on skin: wash with plenty of soap and water, get medical advice/attention.
- If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, get immediate medical advice/attention.
- Do not apply when ambient/surface temperature is below +10°c
- Do not apply in wet weather, when rain is imminent or before surface is completely dry
- Optimum performance is reached after 2-3 days. Allow product to cure overnight before subjecting to heavy use – increase this time in cold, damp conditions
- Always test a small inconspicuous area before use to ensure surface compatibility, performance and finish/texture is acceptable
- Not suitable for non porous surfaces e.g. Quarry tiles, engineering brick, polished or glazed surfaces
- Keep pets away until surface is fully dry
- Protect from frost and store above +5ºc in ventilated area away from heat source
