R373 Supreme Wood Protector Datasheet
![dirt_defence](/img/brands/dirt_defence.webp)
![Supreme Wood Protector](/img/products/R373.png)
R373 Supreme Wood Protector
Wood Protector Wood UV Protector is a water based wood treatment, its special formula works to provide superb protection against water and weathering. Water is repelled from the surface so the timber is dryer for longer periods, this reduces the growth of spores and algae.
Wood UV Protector is a water based wood treatment, its special formula works
to provide superb protection against water and weathering.
Water is repelled from the surface so the timber is dryer for longer periods, this reduces the growth of spores and algae. Ingredients penetrate into the timber to give long lasting protection, available in a variety of colours. Designed as a two coat application.
Water is repelled from the surface so the timber is dryer for longer periods, this reduces the growth of spores and algae. Ingredients penetrate into the timber to give long lasting protection, available in a variety of colours. Designed as a two coat application.
Always test a small hidden portion of the substrate before use, to ensure the
final result is satisfactory and to calculate consumption.
Ensure the surface to be treated is dry, clean, free from any contaminants including dust, dirt, oil, grease, algae and mould.
Algae, moss and spores must be treated and removed with a good quality algicide before application, all residues of the algicide need to be removed and allowed to dry before applying the the Wood UV Protector.
For best results first use a power washer to remove the dirt and grime from between the grooves of the decking. Remove previous coatings such as paint, varnish or stain fully before applying the Decking / Wood Oil.
Ensure the surface to be treated is dry, clean, free from any contaminants including dust, dirt, oil, grease, algae and mould.
Algae, moss and spores must be treated and removed with a good quality algicide before application, all residues of the algicide need to be removed and allowed to dry before applying the the Wood UV Protector.
For best results first use a power washer to remove the dirt and grime from between the grooves of the decking. Remove previous coatings such as paint, varnish or stain fully before applying the Decking / Wood Oil.
- Supplied ready to use do not dilute.
- Shake the container well before use and regularly during application
- Ensure surface is thoroughly dry and clean before proceeding.
- Do not pour directly onto the surface. Apply a generous even coat with a brush, in the direction of the wood grain. Mop up pooling as you go using a lint free cloth. Ensure you cover all edges for optimum performance.
- Allow the first coat to dry, and then apply a second coat.
- Leave to dry for 24 hours before subjecting to heavy traffic.
- Uv resistant coating for exterior wood
- Suitable for vertical and horizontal surfaces which require protection
- Solvent free and easy to use
- Excellent durability against weathering, helping to prevent swelling, shrinkage, splitting and warping
- Reduces the growth of moss and algae
- Long lasting technology
- Allows the wood to breathe
- Enhances the colour of the decking /wood
- Suitable for rough sawn or smooth timber