R372 SNOW FOAM Datasheet
R372 SNOW FOAM
Snow Foam Our high performance Snow Foam removes dirt and grime with ease, it penetrates below the dirt, lifting it off of the paintwork in a gentle yet effective way.
- Recommended dilution 100ml - 300ml of snow foam per 1 litre of water, dependant upon hardness of water and the level of dirt that has built up.
- Adjust snow foam lance to increase or decrease foam, begin spraying the wheels and lower half of the vehicle, gradually progressing to the top of the vehicle, ensuring a thick coat across the whole of the exterior
- Leave the foam to dwell for approx. 5 minuets, then rinse the product off thoroughly, beginning at the top of the vehicle, progressing to the bottom of the vehicle, ensuring that all product has been rinsed off
- Dry the vehicle with a microfibre or chamois.
- Recommended dilution 5 full caps of product per 4-5 litres of water
- Submerge wash mit / sponge into the solution, ensure it is saturated with the solution, begin working form the top of the vehicle to the bottom, rinse wash mit in solution regularly, ensure contamination is fully removed, revisiting areas if necessary. Do not allow the solution to dry to the vehicle.
- Thoroughly rinse with clean water ensuring no produce residue remains.
- Dry the vehicle thoroughly with a microfibre or chamois.
- Always wear gloves when using the product.
- Always test on a small hidden portion of the surface to be cleaner to check compatibility and performance before commencing with the whole area.
- Use out of direct sunlight.
- Do not apply to hot surfaces. Foam may be reduced if the paintwork is hot, wet or hard water is being used.
