R334 Wood Reviver Datasheet
R334 Wood Reviver
Wood Reviver An easy to use, highly effective wood reviver, to bring wood back to its natural warm tones, reversing damaged cause by weathering and UV. Wood Reviver is a water based gel, used to refresh and restore both soft and hard wood back to their natural tone.
An easy to use, highly effective wood reviver, to bring wood back to its
natural warm tones, reversing damaged cause by weathering and UV.
Wood Reviver is a water based gel, used to refresh and restore both soft and hard wood back to their natural tone. Once treated the surface can be over-coated and refinished. Suitable for use on both smooth and roughly sawn wood.
Wood Reviver is a water based gel, used to refresh and restore both soft and hard wood back to their natural tone. Once treated the surface can be over-coated and refinished. Suitable for use on both smooth and roughly sawn wood.
- Always test on a small hidden portion of the surface to be cleaned to check compatibility and performance/finish is acceptable before commencing with the whole area. Do not dilute, wood reviver is supplied ready to use.
- Dampen the wood before application
- Apply generously along the wood grain using a brush or roller to all exposed sides. Complete 2 metres at a time to avoid drying out
- If the product drys re-hydrate by spraying with water or wiping down with a dry cloth
- Leave the product to work for 15 - 30 minutes
- Agitate using a damp cloth or non-metal brush dampened with water
- Rinse the wood thoroughly to remove any remaining residue. Repeat the process as necessary
- The wood is now ready for sanding and applying wood preservative / top coat to prevent any further uv or weather damage.
Brush away leaves/debris and remove surface coatings before treating.
Wood Reviver may remove some surface coatings, however, if any remain
please use a Sealer Remover to remove any sealers / paint which remains
on the surface or an oil and grease remover to remove any remaining oils.
Do not use a pressure washer to clean the wood prior to using the product. Keep children and pets/animals away until cleaning process is complete and surface is dry. Do not apply in direct sunlight. Do not allow to come into contact with plants/shrubs or materials containing calcium carbonate eg, limestone/marble as damage may occur. Avoid contact with metal fixings as discolouration / damage may occur. If contact with metal fixings does occur remove immediately with a water using a damp cloth.
Do not use a pressure washer to clean the wood prior to using the product. Keep children and pets/animals away until cleaning process is complete and surface is dry. Do not apply in direct sunlight. Do not allow to come into contact with plants/shrubs or materials containing calcium carbonate eg, limestone/marble as damage may occur. Avoid contact with metal fixings as discolouration / damage may occur. If contact with metal fixings does occur remove immediately with a water using a damp cloth.
