R306 Class 1 Sealer Datasheet

A high performance, solvent free, penetrating, repellent sealer specially designed for porous substrates such as; concrete, clay, stone and most other calcium based surfaces.

Formulated using the latest technology to give outstanding performance and durability. CE Marking complies with EN 1504-2: 5.3 products/systems for the protection/repair of concrete structures

• Always test a small inconspicuous area before use to ensure the final results are satisfactory and to establish consumption.
• Do not apply in wet weather, when rain is expected within 6 hours or before the surface is completely dry. R306 is supplied ready to use and should not be diluted.
• Shake container well before use.
• Apply with a brush, long pile roller or garden sprayer.
• Apply an even, wet coat at a spread rate of 4-6m² per litre.
• Apply to saturation point in one coat or apply a further wet on wet coat.
• Do not allow the product to dry in between applications.
• Avoid runs, drips or puddling by removing excess product from the surface.

Allow 2 hours for touch dry. Fully cured after 48 hours. Longer curing periods may be required when applied in cooler conditions.

For Health & Safety instructions, first aid measures, spillages and disposal instructions, see separate Health & Safety Data Sheet (MSDS)

Keep out of reach of children. Keep in a dry place between 5c and 30c in the original container.

Remove as much excess product as possible and clean tools and equipment immediately after use with soapy water

Remove surface contamination. All algae and mould should be treated and removed prior to application.

• Alkaline and graffiti resistant
• Provides a hard wearing, invisible, protective seal
• Can be used on both horizontal and vertical surfaces
• Suitable for most natural and cement based substrates
• No change to the texture or colour of the surface
• Allows substrate to breathe so moisture can escape
• Uva resistant
• Resists the growth of mould and algae
• Easy to use
• Water based
• Voc free
• Non-toxic
• Environmentally friendly

Colour	White / Clear
Odour	Barely Perceptible
Form	Liquid
Application Temperature	Between 5c and 30c
Shelf Life	24 Months from the date of manufacture in the original unopened container
PH	5
Specific Gravity @ 25c	1.01
Coverage	4-6m2 per litre depending on