R262-263 Single Pack Waterproofing System Datasheet
R262-263 Single Pack Waterproofing System
Waterproofing System A single pack moisture reactive, solvent free, waterproofing system that is suitable for a wide variety of surfaces. It is specifically designed to waterproof as well as creating a strong yet elastic and flexible barrier on the applied surface. Contains no PU, Bitumen or Acrylic.Resisting all types of water whilst maintaining a vapour permeable, non hazardous, UV stable surface.
Always test a small hidden portion of the substrate before use, to ensure
the final result is satisfactory and to calculate consumption.
Primer may be required on certain surfaces such as: dry and wet concrete, steel, aluminium, lead, roofing felt and rigid bitumen based substrates. To establish if primer is required, perform an adhesion test with the waterproofing system before applying the product. See separate TDS for twin pack epoxy primer application (R235).
Ensure the surface is free from contaminants such as dirt, dust, oil, algae etc before proceeding to apply the product.
Primer may be required on certain surfaces such as: dry and wet concrete, steel, aluminium, lead, roofing felt and rigid bitumen based substrates. To establish if primer is required, perform an adhesion test with the waterproofing system before applying the product. See separate TDS for twin pack epoxy primer application (R235).
Ensure the surface is free from contaminants such as dirt, dust, oil, algae etc before proceeding to apply the product.
Ensure substrate moisture content is below 5% MAXIMUM.
Do not apply during rain or frost and when surface air temperature is below 0ºc and above 40c. If contaminants come into contact with the surface shortly after the product is applied (rainfall may cause indents in the surface) a further light overcoat will generally fix the problem when applied to the dry surface to re-achieve a smooth finish.
Do not apply during rain or frost and when surface air temperature is below 0ºc and above 40c. If contaminants come into contact with the surface shortly after the product is applied (rainfall may cause indents in the surface) a further light overcoat will generally fix the problem when applied to the dry surface to re-achieve a smooth finish.
- One component system, no extra additions or mixing
- Ready to use
- Cold applied
- Water vapour permeable
- Uv resistant
- Excellent durability and weathering capability
- Non flammable
- High elasticity
- Excellent interlayer adhesion / overcoat ability
- Advanced temperature stability
- Will accept a variety of mastic types after initial curing
- Also available as a fibre reinforced grade
| Colour | Available in RAL colours on request. Standard colours: Light / Dark Grey |
| Odour | Low Odour |
| Form | Liquid |
| Viscosity | Low |
| Specific Gravity @ 25c | 1.2 |
| Application Temperature | Between 0c and 40c |
| Shelf Life | 6 months from date of manufacture in original unopened container |
| Drying Time | Touch dry <60 minutes. 24 hours before subjecting to light foot traffic. 7 days 100% cured |
