R254 Grout and Tile Protector Datasheet
R254 Grout and Tile Protector
Grout and Tile Protector Provides long term protection keeping maintenance low allowing for easier cleaning, ideal for bathrooms, kitchens and patios.
Always test a small hidden portion of the substrate before use, to ensure the
final result is satisfactory and to calculate consumption. Allowing the test
patch to weather before proceeding to coat the while area.
Remove surface contamination. Surface should be clean, free from dust,
dirt, oil, efflorescence, organic growth, coatings and water sealers. All algae
and mould should be treated and removed.
- Grout and tile protector is supplied ready to use and should not be diluted.
- Shake well before use.
- Apply an even, wet saturated coat.
- Once the first coat starts to soak in, apply a further wet on wet coat. This method gives deeper penetration into the substrate.
- Avoid runs, drips or puddling by removing excess product from the surface.
- Do not allow the product to dry in between applications.
