A water based penetrating concrete block treatment, its penetrating formula
works in different ways to protect and colour the substrate without the use of
high levels of resin and polymers.
Ingredients penetrate into the substrate to give long lasting protection,
secondary ingredients colour the surface for a restored finish. In addition a
water proofing agent sits close to the surface to give improved weather
protection for a longer lasting finish.
Ensure the surface to be treated is dry, clean, free from any contaminants
including dust, dirt, oil, grease, algae and mould. Algae, moss and spores
must be treated and removed with a good quality algicide designed for this
purpose, all residues of the algicide need to be removed and allowed to dry
before applying the treatment, use a power washer to remove the dirt and
grime from between the gaps.
KEEP OUT OF THE REACH OF CHILDREN.
Store in a cool, well ventilated
area.
Keep container tightly closed. Storage temperature between 8c and
30c.
Do not apply when ambient/surface temperature is below 10c or above
25c. Do not apply in wet weather, when rain is imminent or before
surface is completely dry. Clean regularly with a non-abrasive cleaner to
maintain the visual appearance of the treated surface. The product is
designed to be long lasting and to improve over time, tests have shown
many years protection.
The product will continue to cure and bond
with the substrate for the next 7 days, after
this period the performance will still
continue to improve over the following
weeks.
For Health & Safety instructions, first aid
measures, spillages and disposal
instructions, see separate Health & Safety
Data Sheet (MSDS).
