R18 Fabric Protector Datasheet

Our Fabric Protector is virtually invisible when dry and penetrates into the substrate so there is no need to use strong chemicals to maintain the appearance.

Always test a small hidden portion of the fabric before use, to ensure the final result is satisfactory. Ensure the surface is clean, dry and free from any dust or debris

For Health & Safety instructions, first aid measures, spillages and disposal instructions, see separate Health & Safety Data Sheet (MSDS).

• Spray an even coat
• Leave for 30-40 seconds
• Wipe off excess with a dry, soft cotton cloth or kitchen towel
• Leave surface to fully cure before subjecting to heavy use

Remove as much excess product as possible and clean tools and equipment immediately after use with soapy water.

Water repellence is evident after initial curing but may take up to 7 days to reach 100% efficiency.

• Suede
• Cotton
• Linen
• Absorbent fabrics

• Create an invisible protective seal against oil, grease and stains
• Uses nano penetration technology to go deep into the pores of the substrate whilst remaining invisible and breathable
• Reduce maintenance
• Resist water ingress
• Resist oil, dirt and grease staining

Colour	Clear
Odour	Barely Perceptible
Form	Liquid
Coverage	6 - 10m2 per litre
Application Temperature	Between 5c and 38c
Shelf Life	24 Months from the date of manufacture in the original unopened container