R175-A Dirt Defence Supreme Stone Sealer Datasheet
R175-A Dirt Defence Supreme Stone Sealer
Dirt Defence SUPREME provides extremely long lasting protection, preventing ingress of most types of surface contamination, with the help of Dirt Defence technologies.
Apply with a low pressure spray from bottom to top on vertical surfaces,
taking care not to allow the product to run. Ensure an even, wet coat to the
point of saturation.
Apply an even wet on wet coat to the point of saturation, once the first coat starts to soak in. Between 1 - 3 applications are recommended, allowing for deeper penetration into the substrate.
Avoid runs drips or puddling by removing excess product from the surface. Allow to cure for 48 hours - 7 days before subjecting to heavy use
Apply an even wet on wet coat to the point of saturation, once the first coat starts to soak in. Between 1 - 3 applications are recommended, allowing for deeper penetration into the substrate.
Avoid runs drips or puddling by removing excess product from the surface. Allow to cure for 48 hours - 7 days before subjecting to heavy use
Always test a small hidden area of the substrate before use, to ensure the
final result is satisfactory and to calculate consumption. Cracks must be
repaired using a concrete/mortar repair system. Ensure surface is clean,
free from dust, dirt, oil, efflorescence, organic growth and old paint films.
Pressure washing up to 2500 PSI and the use of algae remover will
eradicate residual organic spores. Efflorescence must be treated with salt
defence before applying.
- Resist moss and lichen formation
- Will not alter the appearance of the surface
- Gives moisture vapour permeable treatment
- Reduce freeze-thaw effects which can lead to long term lasting damage
- Contains no pfoa or pfos ingredients
- Uv resistant, non flammable & environmentally friendly
- Water, oil, stain and uv resistant
- Reduce surface degradation
- Prevents airborne contamination from sticking to the surface
