Always test on a small hidden portion of the surface to be cleaned to check
compatibility and performance before commencing with the whole area
DO NOT apply to hot surfaces or in strong direct sunlight.
Test a small area before use, to ensure the final result is satisfactory.
Remove surface contamination. All algae and mould should be treated and
removed using Algae Remover. Ensure surface is dry before application.
For Health & Safety instructions, first aid measures, spillages and disposal
instructions, see separate Health & Safety Data Sheet (MSDS).
Ready to use product, do not dilute
1. Shake the container, spray liberally on to the surface
2. Buff off the surface using a lint free
cloth, ensure no contamination remains.
3. Repeat the process if surface contamination still remains
KEEP OUT OF THE REACH OF CHILDREN.
Store in a cool, well ventilated area. Keep container tightly closed. Storage
temperature between 8c and 30c.
Remove as much excess product as possible and clean tools and equipment
immediately after use with soapy water.
