R121 Decking Slip-Resist Sealer Datasheet
![enviromose](/img/brands/enviromose.webp)
![Decking Slip-Resist Sealer](/img/products/R121.png)
R121 Decking Slip-Resist Sealer
Enviromose Decking Slip-Resist Sealer is an advanced, high performance penetrating sealer, using the latest micro traction technology to provide a waterproof, breathable, transparent seal to wood and decking.
Enviromose Decking Slip-Resist Sealer is an advanced, high performance penetrating
sealer, using the latest micro traction technology to provide a waterproof, breathable,
transparent seal to wood and decking.
- The unique formulation reduces the amount of slippery algae growth without changing the appearance of the timber.
- Solvent free and easy to use
- Repels moisture
- Long lasting technology
- Reduces the growth of moss and algae
- Protects and waterproofs
- Resists fungal growth & staining
- Quick drying
- Transparent finish
- Always test a small inconspicuous area before use to ensure surface compatibility, performance and finish/texture is acceptable
- Shake container before use
- Ensure surface is thoroughly dry and dust free before application
- Do not pour directly onto the surface. Apply by brush or roller
- Apply a generous even coat, avoiding runs or puddles by removing excess product from the surface. Apply a second coat within 2 hours after the first
- Keep out of reach of children.
- Wear protective gloves/protective clothing/eye protection/face protection.
- Do not get in eyes, on skin, or on clothing.
- Do not eat, drink or smoke when using this product.
- If swallowed: immediately call a poison centre/doctor.
- If on skin: wash with plenty of soap and water, get medical advice/attention.
- If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, get immediate medical advice/attention.
- Do not apply when ambient/surface temperature is below +10°c.
- Do not apply in wet weather, when rain is imminent or before substrate is completely dry
- Optimum performance is reached after 3 days. Allow product to cure overnight before subjecting to heavy use – increase this time in cold, damp conditions
- Not suitable for non porous surfaces e.g. Quarry tiles, engineering brick, polished or glazed surfaces
- Keep pets away until surface is fully dry