Ts10 From Paintstripper.com

Ts10 Heavy Duty Dcm Paint & Varnish Remover (industrial Use Only)

From Chemicals Ltd. The company behind market-leading Paint Stripper, Stone Protection Products, Graffiti Removers And Nano-coatings | paintstripper.com

Product Information
Datasheet

Product Code: R111

Chemicals Ltd

Paint stripper .com

Water washable tank stripper used in conjunction with the Paramose Flo-Through machine with its specialist formulation, for the fast and cost effective removal of most twin pack and lacquered finishes

Ts10

PRODUCT CODE: R111
TS10 HEAVY DUTY DCM PAINT & VARNISH REMOVER (RESTRICTED TO INDUSTRIAL USE ONLY)
OVERVIEW
Water washable tank stripper is suitable for use as a tank stripper or in conjunction with the Paramose Flo-Through machine. Its special formulation will remove most multi layered paint, varnishes and coatings quickly and cost effectively.
Ideal for stripping doors, furniture, alloy wheels etc.. It is designed to remove varnish, twin pack, paints, epoxy adhesive, bitumen and lacquers. Suitable for both hardwood and softwood.
BENEFITS
-Powerful and effective stripper -Fast acting -Cost effective -Removes most paint, adhesives and lacquered .nishes -Removes multiple layers at a time-Non Caustic
IMPORTANT / LIMITATIONS
Ensure there is effective ventilation in all processing areas, in particular for the wet processing and the drying of stripped articles: local exhaust ventilation at strip tanks supplemented by forced ventilation in those areas, so as to minimise exposure and to ensure compliance, where technically feasible, with relevant occupational exposure limits;
Measures to minimise evaporation from strip tankscomprising: lids for covering strip tanks except during loading and unloading; suitable loading and unloadingarrangements for strip tanks; and wash tanks with water orbrine to remove excess solvent after unloading;
Measures for the safe handling of dichloromethane in striptanks comprising: pumps and pipework for transferring paint stripper to and from strip tanks; and suitable arrangementsfor safe cleaning of tanks and removal of sludge;
Personal protective equipment that complies with Directive 89/686/EEC comprising: suitable protective gloves, safety goggles and protective clothing.


PRODUCT CHARACTERISTICS
Colour Off White
Odour DCM
Form Liquid
Speci.c Gravity @ 25ºc 1.25
Evaporation rate High
Application Temperatures Minimum +5ºC Maximum 30ºC
Shelf Life 24 months from the date of
manufacture in the originalunopened container
Boiling point 35ºC

SURFACE PREPERATION
Always test a small hidden portion of the substrate before use, to ensure the .nal result is satisfactory and to calculate consumption.
APPLICATION
Ideally apply out of direct sunlight
Using a .o through machine:Stand object in tray and apply TS10 working from the bottom up.
Allow TS10 to soak in for 5 minutes and then reapply again working from the bottom upwards, washing off the coating with stripper as you go.
When most of the old surface is removed or loosened leave to drain for 1-2 minutes
Using a tank:Submerge item(s) at least 25mm below surface
Allow the excess to drip back into the tank
Remove residue with cold water and allow to dry

© Chemicals Limited, PO Box 88, Southport, Merseyside PR8 5LH. Tel: 01704 880800. Fax: 01704 880900. BS EN ISO 9001:2008 Cert No: 4146865
VERSION 1 AUGUST 2018 FORM 34
PRECAUTIONS FOR USE For Health & Safety instructions, .rst aid measures, spillages and disposal instructions, see separate Health & Safety Data Sheet (MSDS) CLEANING OF EQUIPMENT Remove as much excess product as possible and clean tools and equipment immediately after use with soapy water.
STORAGE Keep out of reach of children Keep in a dry place between 5ºc and 30ºc in the original container.


© Chemicals Limited, PO Box 88, Southport, Merseyside PR8 5LH. Tel: 01704 880800. Fax: 01704 880900. BS EN ISO 9001:2008 Cert No: 4146865


Related Products

AS10

Very low evaporating stripper used for removal of paint to achieve a true Class 0 substrate – also used for removal of paint, artex and textured paint containing asbestos
[ Find out more about AS10 ]

Enviromose Pro

Already used to strip over 2 million m² safely by large contractors, painters & decorators, furniture restoration companies, flooring & decking contractors and artex removal specialists
[ Find out more about Enviromose Pro ]

TS10

Water washable tank stripper used in conjunction with the Paramose Flo-Through machine with its specialist formulation, for the fast and cost effective removal of most twin pack and lacquered finishes
[ Find out more about TS10 ]