R111 TS10 Datasheet

< < Back to All Datasheets

R111 TS10

Water washable tank stripper is suitable for use as a tank stripper or in conjunction with the Paramose Flo-Through machine. Its special formulation will remove most multi layered paint, varnishes and coatings quickly and cost effectively. Ideal for stripping doors, furniture, alloy wheels etc..


Designed to remove varnish, twin pack, paints, epoxy adhesive, bitumen and lacquers. Suitable for both hardwood and softwood.

Important Information

Ensure there is effective ventilation in all processing areas, in particular for the wet processing and the drying of stripped articles: local exhaust ventilation at strip tanks supplemented by forced ventilation in those areas, so as to minimise exposure and to ensure compliance, where technically feasible, with relevant occupational exposure limits;

Measures to minimise evaporation from strip tanks comprising: lids for covering strip tanks except during loading and unloading; suitable loading and unloading arrangements for strip tanks; and wash tanks with water or brine to remove excess solvent after unloading;

Measures for the safe handling of dichloromethane in strip tanks comprising: pumps and pipework for transferring paint stripper to and from strip tanks; and suitable arrangements for safe cleaning of tanks and removal of sludge; Personal protective equipment that complies with Directive 89/686/EEC comprising: suitable protective gloves, safety goggles and protective clothing.

Surface Preparation

Always test a small hidden portion of the substrate before use, to ensure the final result is satisfactory and to calculate consumption.

How To Use

Ideally apply out of direct sunlight Using a flo through machine: Stand object in tray and apply TS10 working from the bottom up. Allow TS10 to soak in for 5 minutes and then reapply again working from the bottom upwards, washing off the coating with stripper as you go. When most of the old surface is removed or loosened leave to drain for 1-2 minutes Using a tank: Submerge item(s) at least 25mm below surface Allow the excess to drip back into the tank Remove residue with cold water and allow to dry

Precautions For Use

For Health & Safety instructions, first aid measures, spillages and disposal instructions, see separate Health & Safety Data Sheet (MSDS).

Cleaning Of Equipment

Remove as much excess product as possible and clean tools and equipment immediately after use with soapy water.

Perfect For Use On

  • Doors
  • Furniture
  • Alloy wheels
  • Hardwood
  • Softwood


  • Powerful and effective stripper
  • Fast acting
  • Cost effective
  • Removes most paint, adhesives and lacquered finishes
  • Removes multiple layers at a time
  • Non caustic


Keep out of reach of children Keep in a dry place between 5c and 30c in the original container.

Product Characteristics

ColourOff White
Evaporation RateHigh
Specific Gravity @ 25c1.25
Shelf Life24 Months from the date of manufacture in the original unopened container - protect from frost
Application TemperaturesMinimum +5c Maximum 30c
Boiling Point35c

R111 TS10 Datasheet From Paint Stripper.com