R07 ECO ACID Cleaner Datasheet
![paramose](/img/brands/paramose.webp)
![ECO ACID Cleaner](/img/products/R07.png)
R07 ECO ACID Cleaner
Eco Acid cleaner is a powerful, pro grade, acid free cleaner that does not require the neutralisation process associated with other acid or alkaline cleaners. This is a super concentrated formulation, low pH organic salt based cleaner that outperforms all other non acid alternatives.
Enviromose Eco Acid removes Cement, Scale, Rust, Oxidisation, Atmospheric Contamination and Dirt, in a safer way to traditional acid cleaners.
Eco Acid cleaner is a powerful, pro grade, acid free cleaner that does not require the neutralisation process associated with other acid or alkaline cleaners. This is a super concentrated formulation, low pH organic salt based cleaner that outperforms all other non acid alternatives.
Enviromose Eco Acid removes Cement, Scale, Rust, Oxidisation, Atmospheric Contamination and Dirt. It is also an ideal surface preparation before applying any coatings.
Eco Acid cleaner is a powerful, pro grade, acid free cleaner that does not require the neutralisation process associated with other acid or alkaline cleaners. This is a super concentrated formulation, low pH organic salt based cleaner that outperforms all other non acid alternatives.
Enviromose Eco Acid removes Cement, Scale, Rust, Oxidisation, Atmospheric Contamination and Dirt. It is also an ideal surface preparation before applying any coatings.
Always test an inconspicuous area before use to ensure the compatibility
and finished result is acceptable. Ensure the surface(s) to be stripped are dry
before applying the Enviromose Pro Grade Paintstripper.
Protection should be provided for floor coatings that you do not wish to remove or any surface that may be damaged by the remover i.e. perspex, plastics, rubber
Protection should be provided for floor coatings that you do not wish to remove or any surface that may be damaged by the remover i.e. perspex, plastics, rubber
- Depending on the level of soiling, the product can be used neat or it can be diluted. Dilution depends on the soiling, recommend dilution up to the ratio of 1:5 with water.
- Apply the product using a brush or a garden sprayer. Re-apply after 5 minuets
- Leave until the product to penetrates the contamination which can take from 5 - 10 minutes depending on the level of soiling.
- Agitate with a stiff brush and rinse with clean water or wash down with a power jet. Re apply if contamination persists