Lifetime Roof Coating From Paintstripper.com

From Chemicals Ltd. The company behind market-leading Paint Stripper, Stone Protection Products, Graffiti Removers And Nano-coatings | paintstripper.com

Product Information
Datasheet

Product Code: R303

Chemicals Ltd

Paint stripper .com

Dirt Defence hybrid waterproofing system is suitable for a variety of surfaces, specifically designed to waterproof curating a strong, durable yet elastic barrier on the surface. Our hybrid two part system is reinforced with polyester fabric allowing it to resist all types of moisture and dirt ingress whilst maintaining a vapour permeable, non hazardous, UV stable substrate. Suitable for use on a wide variety of flat roofs, gutters and drainage systems.

R303 lifetime roof coating from Chemicals Ltd - Home of the original Paint Stripper
Lifetime Roof Coating

VERSION 1 JUNE 2019 FORM 34

PRODUCT CODE: R303 TECHNICAL DATA SHEET

LIFETIME ROOF COATING OVERVIEW PRODUCT CHARACTERISTICS


Dirt Defence hybrid waterproofing system is suitable for a Colour Available in RAL colours on request. variety of surfaces, specifically designed to waterproof, Standard colours: Light Dark Grey creating a strong, durable, yet elastic barrier on the surface. Our hybrid two part system is reinforced with Odour Low Odour polyester fabric allowing it to resist all types of moisture Form Viscous and dirt ingress whilst maintaining a vapour permeable, non hazardous, UV stable surface. The liquid can be Specific Gravity 1.4 used without the polyester fabric if required. 25c Suitable for use on: Drying Time Touch dry 60 minutes Flat roofs, balconies, green roofs living walls, gutters and drainage systems. Ideal for patching small areas and 24 hours before subjecting to light sealing long gutter runs. foot traffic 7 days 100 cured

BENEFITS


Application Minimum 0C Temperatures Maximum 45C - 25 years performance - Resistant to standing water, highly suited for use on Shelf Life 12 months from the date of flat roofs where this can often be an issue manufacture in the original unopened - Instantly water repellant after application container - Ready to use - Can be applied wet on wet coats APPLICATION - Resists moss and lichen formation. - Highly UV resistant. Apply the first coat to the surface using a brush or roller, - Non Flammable making sure the surface is at the point of saturation - Environmentally Friendly using 1 - 1.5kg perm - Suitable base for living walls roofs Place the fabric on top of the initial coat until saturation occurs making sure that there is no air trapped beneath and the fabric is free of creases.

SURFACE PREPERATION


Apply the second coat wet on wet to the saturated Always test a small hidden portion of the substrate before surface again using a brush or roller until a smooth finish use, to ensure the final result is satisfactory and to is visible and the fabric is fully submerged using 1.5kg calculate consumption. perm Primer may be required on certain surfaces such The surface will be touch dry in 60 minutes, allow to as: dry and wet concrete, steel, aluminium, lead, fully cure for 24 hours before subjecting to foot traffic. roofing felt and rigid bitumen based substrates. To establish if primer is required, perform an adhesion The product will be fully cured within 7 days. test with the waterproofing system before applying the product. See separate TDS for twin pack epoxy For use without polyester fabric, apply 1 coat at approx. primer application R235. 1.5kg per m Ensure the surface is free from contaminants such as dirt, PRECAUTIONS FOR USE dust, oil, algae etc before proceeding to apply the product. For Health Safety instructions, first aid measures, spillages and disposal instructions, see separate Health Safety Data Sheet MSDS Chemicals Limited, PO Box 88, Southport, Merseyside PR8 5LH. Tel: 01704 880800. Fax: 01704 880900. BS EN ISO 9001:2008 Cert No: 4146865 VERSION 1 JUNE 2019 FORM 34

IMPORTANT LIMITATIONS COVERAGE


Ensure substrate moisture content is below 5. 2m per litre If contaminants come into contact with the surface or the surface is flawed shortly after the product is applied e.g

STORAGE


heavy rainfall may cause indents on the surface this can be fixed by a light overcoat once the surface is dry in order to re-achieve a smooth finish. Keep out of reach of children Do not apply during rain or frost and when surface Keep in a dry place between 5c and 30c in the original air temperature is 0C and 45C. container.

CURING

CLEANING OF EQUIPMENT
Water repellence is evident after initial curing but may Remove as much excess product as possible and clean take up to 7 days to reach 100 efficiency. tools and equipment immediately after use with soapy water. Chemicals Limited, PO Box 88, Southport, Merseyside PR8 5LH. Tel: 01704 880800. Fax: 01704 880900. BS EN ISO 9001:2008 Cert No: 4146865 VERSION 1 JUNE 2019 FORM 34 Chemicals Limited, PO Box 88, Southport, Merseyside PR8 5LH. Tel: 01704 880800. Fax: 01704 880900. BS EN ISO 9001:2008 Cert No: 4146865

Related Products

Acrylic sealer

Dirt Defence Acrylic Sealer is based on a water based dual core acrylic polymer to give good performance on most surfaces. It provides a hard wearing and weather-proof seal to block paving, paths and patios. Available in a satin finish, Patio and Block Seal stabilises the substrate, repels dirt, oil, fuel stains, enhances the surface finish and inhibits the growth of moss and algae.
[ Find out more about Acrylic sealer ]

Black limestone sealer

Dirt Defence black limestone sealer is an advanced, high performance sealer using the latest technology to provide a waterproof, breathable, durable seal to natural surfaces such as limestone. Solvent free, Easy to use, Repels dirt, oil, stains and grease, Inhibits the growth of moss and algae
[ Find out more about Black limestone sealer ]

Extreme Seal

R217 is a high solids, silane-terminated base with added alpha-silane technology. R217 cures on contact with moisture, its chemical structure has been optimised to achieve low viscosity with a high solids content.
[ Find out more about Extreme Seal ]

Lifetime roof coating

Dirt Defence hybrid waterproofing system is suitable for a variety of surfaces, specifically designed to waterproof curating a strong, durable yet elastic barrier on the surface. Our hybrid two part system is reinforced with polyester fabric allowing it to resist all types of moisture and dirt ingress whilst maintaining a vapour permeable, non hazardous, UV stable substrate. Suitable for use on a wide variety of flat roofs, gutters and drainage systems.
[ Find out more about Lifetime roof coating ]

Overcoatable Hybrid Roof Coating

A single pack moisture reactive, solvent free, waterproofing system that is suitable for a wide variety of surfaces. It is specifically designed to waterproof as well as creating a strong yet elastic and flexible barrier on the applied surface. Contains no P.U, Bitumen or Acrylic. Resisting all types of water ingress whilst maintaining a vapour permeable, non hazardous, UV stable surface. Suitable for use on a wide variety of flat roofs, gutters and drainage systems.
[ Find out more about Overcoatable Hybrid Roof Coating ]

Stone and masonry sealer

A water based surface treatment containing invisible to the eye micronised Titanium Dioxide which protects concrete and stone substrates. UV light activates a catalytic action between NOx pollutants in the air, converting them to harmless water, CO² and nitrate salts, allowing them to be simply washed away by rain water.
[ Find out more about Stone and masonry sealer ]